Print this Page
4x4 Posi-Lok Dodge
W-Series
Pickup, Ramcharger, Trailduster


 |
1985-1993 |
W-Series Pickup, Ramcharger, Trailduster |
1994-2001 |
Ram 1500 w/ Dana 44-60 |
1994-2002 |
Ram 2500, 3500 w/ Dana 44-60 |
1985-1993 |
W-Series Pickup, Ramcharger, Trailduster |
1994-2001 |
Ram 1500 w/ Dana 44-60 |
1994-2002 |
Ram 2500, 3500 w/ Dana 44-60 |
1985-1993 |
W-Series Pickup, Ramcharger, Trailduster |
|
4x4 Posi-Lok replaces the vacuum
actuator with a cable operated actuator that puts the driver in control of the
engagement from inside the cab. After engaging the transfer case, a one inch
pull of the 4x4 Posi-Lok cable connects the right front axle to the intermediate
shaft using the shift collar and fork, and 4-wheel drive is engaged! Simply
reverse the procedure to disengage 4-wheel drive. 4x4 Posi-Lok also works great
with lockers! When the front axle is locked, you can disengage the passenger
side in order to make turns without wheel hop.
- The colder the temperature, the longer it will take
to engage.
- If the front differential becomes submerged, the TLA
temperature will cool and the 4-wheel drive will disengage.
- The TLA unit can cause excessive wear on internal components
in the differential and may cause other electrical problems.
- 4x4 Posi-Lok reduces front differential wear and right
axle breakage.
- 4x4 Posi-Lok provides 2-wheel drive low range, giving
the vehicle 4-LO torque at the rear axle with bind free steering only available
in 2-HI. This feature is not available with factory systems and is beneficial
when maneuvering trailers.
- 4x4 Posi-Lok will not disengage when ignition is turned
off or the differential is submerged.
- 4x4 Posi-Lok is compatible with manual or electric
transfer cases and installation can be completed in one to two hours with
basic hand tools. No internal differential work is required.
- New high-strength aluminum housing for the central axle disconnect
system
- Heavy-duty cable
- Easy to follow instructions
- Complete wiring system to ensure the 4WD dash indicator
light functions properly
The Perm-Lok permanently engages the Central Axle Disconnect (CAD) system and couples both front axles permanently. Once installed, the front axles will not pull until the transfer case in engaged.
- High-strength aluminum fork with pads
- Replaces your old worn out fork and pads on Dodge applications

4x4 Posi-Lok, www.4x4posi-lok.com
Copyright 2001 4x4 Posi-LokPatent No. 5,605,213